·The LPC2119/LPC2129 are based on a 16/32 bit ARM7TDMI-S™ CPU with real-time emulation and embedded trace support, together with 128/256 kilobytes (kB) of embedded high speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at maximum clock rate. For critical code size applications, the alternative 16-bit Thumb® Mode reduces code by more than 30 % with minimal performance penalty.
·With their compact 64 pin package, low power consumption, various 32-bit timers, 4-channel 10-bit ADC, 2 advanced CAN channels, PWM channels and 46 GPIO lines with up to 9 external interrupt pins these microcontrollers are particularly suitable for automotive and industrial control applications as well as medical systems and fault-tolerant maintenance buses. With a wide range of additional serial communications interfaces, they are also suited for communication gateways and protocol converters as well as many other general-purpose applications.
|
|
· 16/32-bit ARM7TDMI-S microcontroller in a tiny LQFP64 package.· 16 kB on-chip Static RAM.·128/256 kB on-chip Flash Program Memory. 128-bit wide interface/acceleratorenables high speed 60 MHz operation.· In-System Programming (ISP) and In-Application Programming (IAP) via on-chip boot-loader software. Flash programming takes 1 ms per 512 byte line. Single sector or full chip erase takes 400 ms.· EmbeddedICE-RT interface enables breakpoints and watch points. Interrupt service routines can continue to execute while the foreground task is debugged with the on-chip RealMonitor™ software.·Embedded Trace Macrocell enables non-intrusive high speed real-time tracing of instruction execution.· Two interconnected CAN interfaces with advanced acceptance filters.· Four channel 10-bit A/D converter with conversion time as low as 2.44 ms.· Multiple serial interfaces including two UARTs (16C550), Fast I2C (400 kbits/s) and two SPIs· 60 MHz maximum CPU clock available from programmable on-chip Phase-Locked Loop with settling time of 100 ms.· Vectored Interrupt Controller with configurable priorities and vector addresses.· Two 32-bit timers (with four capture and four compare channels), PWM unit (six outputs), Real Time Clock and Watchdog.
|
Post a Buying Lead
Required Field 
